How to Convert the RCI Longhorn N6 to 11 Meter
The RCI Longhorn N6 is a very simple radio to convert. This modification only requires connecting one resistor.
Step 1: Open the Radio
Carefully remove the radio’s cover so you can access the internal circuit board.
Step 2: Locate the Resistor
Find the resistor location shown in the reference images below.


Step 3: Connect the Resistor
Once the resistor is located:
-
Connect the resistor from Position 1
-
To Position 3
That is the only connection required. No cutting, removing, or adding other components is necessary.

Step 4: Reassemble the Radio
After the resistor is connected:
-
Inspect your work
-
Close the radio back up
-
Secure all screws
Done
The conversion is complete. The radio is now set for 11 meter operation.