President Washington 10 Meter to 11 Meter Conversion Guide
Looking to convert your President Washington radio from 10 meter to 11 meter? This guide covers the basic step-by-step process, what you need before starting, and what to check after the conversion is complete.
Step 1: Identify Your Radio
Make sure you confirm the exact President Washington model you are working on.
Step 2: Prepare Your Tools
Set up a clean workspace with the proper tools and lighting.
Step 3: Disconnect Everything
Remove power, antenna, microphone, and accessories before opening the radio.
Step 4: Open the Radio
Carefully remove the cover and organize all screws and parts.
Step 5: Find this Section
Locate this area of the board.....

Step 6: Perform the Conversion

Step 7: Put the Radio Back Together
Reassemble everything carefully and make sure all parts are secure.
Step 8: Test the Radio
Power the radio on and verify the new setup is working properly.
Step 9: Check Performance
Confirm channel operation, receive quality, transmit function, and overall stability.
Step 10: Do a Final Review
Inspect the radio one last time and make sure it is ready for normal use.